Parameters serie 6

#define VAR_MODEL 1 // Model
#define VAR_SERIAL 2 // Serial number
#define VAR_LANGUAGE 3 // User language
#define VAR_DEGREES 4 // Celsius or fahrenheit degrees
#define VAR_POWER_MODEL 5 // Model of power board
#define VAR_POWER_SERIAL 6 // Serial number of power board
#define VAR_YEAR 7 // RTC year
#define VAR_MONTH 8 // RTC month
#define VAR_DAY 9 // RTC day
#define VAR_HOUR 10 // RTC hour
#define VAR_MINUTE 11 // RTC minute
#define VAR_BLOWER_MAX_SPEED 12 // Max speed for gas blower
#define VAR_BLOWER_START_SPEED 13 // start speed for gas blower
#define VAR_BLOWER_MIN_SPEED 14 // min speed for gas blower
#define VAR_MOT_NR 15 // number of fans
#define VAR_RK_NR 16 // number of rotor clean
#define VAR_CLIMA_MEAS 17 // measure clima?
#define VAR_FAIR_MODE 18 // exposition mode: everything but the power
#define VAR_LIMIT_WATER_TEMP 19 // limit water erogation as a function of the high temperature?
#define VAR_LIMIT_WATER_FSPEED 20 // limit water erogation as a function of the fan speed?
#define VAR_ADAPTIVE_CLIMA 21 // always use the adaptive clima autocorrection?
#define VAR_BLOWER_PPK_DROP 22 // percent of the blower after time at max
#define VAR_EXCLUDE_TL1 23 // use TL2 only (electrical ovens only)
#define VAR_EXCLUDE_TL2 24 // use TL1 only (electrical ovens only)
#define VAR_MAX_FSPEED_NO_INVERSION 25 // maximum fan speed without inversion (1-4)
#define VAR_POWER_KNOCKER 26 // power knocking level
#define VAR_PREHEAT_WATER 27 // if first step of cooking has clima > 0, erogate water last istants of preheat
#define VAR_AVOID_RETROFIT 28 // Plus Ovens Only - disable retrofit washing
#define VAR_STR_CLIMA_MEASURE_INFO 29 // plus only - autocal var - humidity measure structure holding expected rpm values at different speeds and temperatures
#define VAR_VOLTAGE_AT_CALIBRATION 30 // plus only - autocal var - V value during calibration
#define VAR_DETERGENT_PUMP_SCALE 31 // percent of variation of the time to pump detergent
#define VAR_DETERGENT_CTYPE 32 // type of container or concentration for detergent
#define VAR_SCALE_INVERSION_TO_STEP 33 // tells if the inversion time should be proportional to each step length
#define VAR_BLW_NR 34 // number of blower for a gas big oven
#define VAR_IMPORT_FROM_USB 35 // import data from USB
#define VAR_START_FUMES_TEST 36 // start fumes test for a gas oven
#define VAR_START_HUM_CALIB 37 // start a humidity calibration
#define VAR_START_FIRM_UPDATE 38 // start a firmware update
#define VAR_EXPORT_TO_USB 39 // export data to USB
#define VAR_VOLUME 40 // Unit of measure for volume
#define VAR_BLOWER_MAX_SPEED_G25 41 // max blower speed on G25 gas type
#define VAR_BLOWER_MAX_SPEED_G30 42 // max blower speed on G30 gas type
#define VAR_BLOWER_MAX_SPEED_G31 43 // max blower speed on G31 gas type
#define VAR_BLOWER_START_SPEED_G25 44 // start blower speed on G25 gas type
#define VAR_BLOWER_START_SPEED_G30 45 // start blower speed on G30 gas type
#define VAR_BLOWER_START_SPEED_G31 46 // start blower speed on G31 gas type
#define VAR_BLOWER_MIN_SPEED_G25 47 // min blower speed on G25 gas type
#define VAR_BLOWER_MIN_SPEED_G30 48 // min blower speed on G30 gas type
#define VAR_BLOWER_MIN_SPEED_G31 49 // min blower speed on G31 gas type
#define VAR_GAS_TYPE 50 // G20, G25, G30, G31
#define VAR_CHEFTOP 51 // cheftop written on top of the home is 1, baker if 0
#define VAR_FAT_GATHERING 52 // activate fat gathering valve
#define VAR_AUTO_UNIFORM 53 // do you want the oven to automanage smooth temperature ramp-ups?
#define VAR_OVEN_MODEL 54 // oven model
#define VAR_OVEN_SERIAL 55 // oven serial number
#define VAR_LOAD_MODEL_PARAMETERS 56 // load model parameters
#define VAR_BRITA_VOLUME 57 // brita remaining volume
#define VAR_BRITA_HARDNESS 58 // brita water hardness
#define VAR_BRITA_PIN 59 // brita pin
#define VAR_MARKET_ZONE 60 // 0=EU; 1=USA; 2=AUS; 3=JAP
#define VAR_USE_TROLLEY_MICRO 61 // default 1 on big ovens
#define VAR_COOL_EXHAUST 62 // # variable to use the cool exhausting valve despite the market zone: useful for future requests.
#define VAR_TL1_POWER 63 // power consumption of TL1
#define VAR_TL2_POWER 64 // power consumption of TL2
#define VAR_EV1_FLOW 65 // flow for ev1 valve
#define VAR_EV2_FLOW 66 // flow for ev2 valve
#define VAR_EV_ABB_FLOW 67 // flow for exhaust cooling valve
#define VAR_EL_2_FLOW 68 // flow for back washing valve
#define VAR_EG_1_FLOW 69 // flow for rotor 1 valve
#define VAR_EG_2_FLOW 70 // flow for rotor 2 valve
#define VAR_DET_FLOW 71 // flow for detergent pump
#define VAR_DHCP 72 // use dhcp
#define VAR_NET_IP 73 // oven ip
#define VAR_NET_MASK 74 // oven netmask
#define VAR_NET_GW 75 // oven gateway
#define VAR_NET_DNS 76 // oven dns
#define VAR_MY_HOME_STRUCT 77 // my home information
#define VAR_REPORTED_VOLTAGE 78 // voltage reported for power consumption
#define VAR_HV 79 // is high voltage? (440-480V)
#define VAR_DOUBLE_START_GAS 80 // ignite and extinguish gas before start under a certain temperature
#define VAR_NOMINAL_POWER 81 // value in watts of total nominal power
#define VAR_STEAM_TABLE 82 // // this parameter holds the value of the steam erogation table to use (0,1,2,3,4..)
#define VAR_WASHING_COUNTER 83 // // total number of oven washings
#define VAR_WASH_BEFORE_HOOD 84 // // number of oven washing before forcing the hood wash after the ovens
#define VAR_USE_MONO_HEART 85 // // use single point of heart probe (to use optional LONG probe for pastry)
#define VAR_COOKING_COUNTER 86 // // number of cookings between wash
#define VAR_COOKING_BEFORE_WASHING 87 // // max number of cooking before forcing a wash
#define VAR_UPSCALE_BLOWER_MIN 88 // // percent (100-400) to upscale current minimum blower speed
#define END_OF_COOK_BUZZER 89 // Second of buzzer ring at end of cooking
#define VAR_LOCK_RINSE 90 // 1:the rinse CANNOT be interrupted, otherwise if 0
#define VAR_SHOW_SUPERQUICK 91 // list superquick washing in washing list
#define VAR_OSMOSI_IS_ACTIVE 92 // Use osmosi for water instead of brita
#define VAR_RESET_OSMOSI 93 // Reset osmosi counter
#define VAR_OSMOSI_VOLUME 94 // Remaining litres for osmosi
#define VAR_START_FUMES_TEST_2 95 // Start a second fumes test
#define VAR_USE_FUMES_PROBE 96 // its NO for backward compatibility of gas ovens only
#define VAR_ LOAD_CELL_OFFSET 97 // calibration value for load cell of fat gathering system
#define VAR_ FUMES_TEMP_LIMIT 98 // temperature limit for fumes in gas ovens
#define VAR_ FUMES_TEMP_DELTA 99 // delta temperature limit for fumes in gas ovens
#define VAR_HOOD_TEMP_LIM 100 // // hood water erogation temperature
#define VAR_UPDATE_POWER_BOARD 101 // Update power board
#define VAR_UPDATE_ETHERNET_BOARD 102 // Update ethernet board
#define VAR_UPDATE_WIFI_BOARD 103 // Update wifi board
#define VAR_UPDATE_3G_BOARD 104 // Update 3G board
#define VAR_UPDATE_GAS_FUMES_BOARD 105 // Update gas fumes board
#define VAR_THICKNESS 106 // Uom for thickness
#define VAR_WEIGHT 107 // Uom for weight
#define VAR_ENERGY 108 // Uom for energy
#define VAR_LIMIT_MT_WATER 109 // activates the limitation of water in multitime when no timer is loaded
#define VAR_LOAD_CELL_CALIBRATION 110 // function that allows calibration of automatic fat collection cabinet
#define VAR_USE_TANK_MICRO 111 // used to disable the check for detergent tank microswitch (big only)
#define VAR_MAX_PREHEAT_HOLD 112 // maximum time after reaching set point in preheat before turning resistors off
#define VAR_BACK_CMB_OFFSET 113 // // offset value for carter probe
#define VAR_FRONT_CMB_OFFSET 114 // // offset value for door probe
#define VAR_HEART_CMB_OFFSET 115 // // offset value for heart probe
#define VAR_TEST_CONNECTION 116 // Test internet connection
#define VAR_WIFI_PASSWORD 117 // Wifi password
#define VAR_SIM_PIN 118 // SIM Pin
#define VAR_SIM_PUK 119 // SIM Puk
#define VAR_WIFI_NAME 120 // Wifi SSID
#define VAR_UPDATE_SOUS_VIDE_BOARD 121 // Update sous vide board
#define VAR_LOCK_USER_PROGRAMS 122 // // locks the capability to save/edit/delete the user programs stored in the oven
#define VAR_DRY_MAXI_SCALE 123 // // scaling percent for dry maxi limitation (to avoid hood fogging)
#define VAR_HOOD_HALT_DELAY 124 // // minutes after cook/wash when the hood keeps working
#define VAR_USE_PROBE 125 // // new variable to manage core probe
#define VAR_STANDBY 126 // Standby in seconds
#define VAR_TZ_CITY 127 // Time zone city in english
#define VAR_TZ_DST 128 // Daylight saving time on, off, auto
#define VAR_LOCK_MANUAL 129 // // lock manual cookings
#define VAR_3G_APN 130 // APN for 3G connection
#define VAR_SAFE_TURN_TL_OFF 131 // use a safe protection when turning the tl off in a couple of electical oven models
#define VAR_AUTO_SET_DATETIME 132 // Auto set date and time from internet
#define VAR_CONVERT_CONS_TO_MONEY 133 // Convert consumption to money
#define VAR_DECIMAL_SIGN 134 // Simbol for decimals
#define VAR_ENERGY_PRICE 135 // Price for energy
#define VAR_WATER_PRICE 136 // Price for water
#define VAR_DETERGENT_PRICE 137 // Price for detergent
#define VAR_CURRENCY_SYMBOL 138 // Symbol for currency
#define VAR_SYMBOL_POSITION 139 // Currency symbol position
#define VAR_SHOW_EOC_OPTIONS 140 // shows buttons at the end of the cooking process to add time, move probe and add temperature
#define VAR_AMC_MODE 141 // // replaces lock_rinse, reverted
#define VAR_KIT_BOOST_TEMPERATURE 142 // activates the 300C boost in preheating
#define VAR_HIDE_EOC_ACTIONS 143 // hides end of cooking actions (add probe, move probe, add time)
#define VAR_CAN_SHOW_SMOKER 144 // flag to mark ovens that cannot show smoker icon anywhere
#define VAR_USE_SMOKER 145 // activate the visibility of the icon to set smoker steps
#define 146 //
#define VAR_SHOW_SET 147 // // used to hide home icons
#define VAR_SHOW_MINDMAPS 148 // // used to hide home icons
#define VAR_SHOW_PROGRAMS 149 // // used to hide home icons
#define VAR_SHOW_MULTITIME 150 // // used to hide home icons
#define VAR_SHOW_CHEFUNOX 151 // // used to hide home icons
#define VAR_SHOW_MISEENPLACE 152 // // used to hide home icons
#define VAR_SHOW_ROTORKLEAN 153 // // used to hide home icons
#define VAR_SHOW_READYCOOK 154 // // used to hide home icons
#define VAR_SHOW_DATA 155 // // used to hide home icons
#define VAR_SOUSVIDE_PROBE_OFFSET 156 // // accessor probe offset
#define VAR_PROVER_CHAMBER_OFFSET 157 // // accessor probe offset
#define VAR_PROVER_RESISTOR_OFFSET 158 // // accessor probe offset
#define VAR_HOLDING_CHAMBER_OFFSET 159 // // accessor probe offset
#define VAR_HOLDING_COREPROBE_OFFSET 160 // // accessor probe offset
#define VAR_DECK_CEIL_OFFSET 161 // // accessor probe offset
#define VAR_DECK_FLOOR_OFFSET 162 // // accessor probe offset
#define VAR_WASHING_DIAGNOSTIC 163 // // (de)activate all checks for water/detergent presence during washing
#define VAR_CHAMBER_PROBES_POSITIONING 164 // // switches between FRONT/BACK and TOP/BOTT
#define VAR_WIFI_SCAN 165 // Scan WIFI
#define VAR_WIFI_TYPE 166 // Free or WPA
#define VAR_STEAM_BOOST 167 // use preheating holding time automatically
#define VAR_CAN_USE_STEAM_BOOST 168 // test machine parameter to lock STEAM_BOOST
#define VAR_SHOW_FULL_MENU 169 // this variable reveal all menu hidden by parameter set
#define VAR_IMPORT_PICTURES 170 // Import pictures from USB
#define VAR_SHOW_BOOST_300 171 // this var just selects whether to show the menu item for KIT_BOOST_TEMPERATURE (-HT ovens only)
#define VAR_SHOW_HUMIDITY_MEASUREMENT 172 // this var just selects whether to show the menu item for HUMIDITY_MEASURE (0523 with 60mm fan only)
#define VAR_SHOW_ADAPTIVE_COOKING 173 // this var just selects whether to show the menu item for ADAPTIVE_COOKING (0523 with 60mm fan only)
#define VAR_DELTA_STOP_PRECOOL 174 // // delta from setpoint at which the precool must end
#define VAR_GAS_TIME_TO_INC 175 // time under sp to increment the power value
#define VAR_MAX_SB_TIME 176 // maximum number of minutes of duration of special Steam.Boosting conditions
#define VAR_INHIBIT_DRY_MAXI 177 // 3 level control of dry maxi incapacitance
#define VAR_COMBUSTION_HEAT 178 // unit for gas consumption
#define VAR_GAS_MODEL 179 // index for different evaluation models
#define VAR_COMBUSTION_HEAT_UOM 180 // unit of measure for combustion heat
#define VAR_GAS_CONSUMPTION_UOM 181 // unit of measure for gas consumption output
#define VAR_GAS_PRICE 182 // price for gas in volume (for uom selected with consumption
#define VAR_RESET_PARAMETERS 183 // command to reset to factory default
#define VAR_SB_EROGATION_UOM 184 // SteamBoost erogation unit of measure for water
#define VAR_SB_MAX_TIME 185 // SteamBoost erogation time limit in minutes
#define VAR_MIN_COOLING_TEMP 186 // minimum temperature to allow precooling
#define VAR_TRAYS_NR 187 // how many trays has the oven?
#define VAR_WATERLESS_OVEN 188 // if the oven is not connected to water
#define VAR_PROVER_MAX_EROGATION_TIME_PER_HOUR 189 // limit seconds of erogation per hour in prover
#define VAR_RESITOR_BOX_TEMP_OFFSET 190 // prover; delta temp between chamber and resitor box
#define VAR_PROVER_TERMOSTATATION_HYSTERESYS 191 // ex prover parameter, now editable
#define VAR_PROVER_CLIMA_AUTH_DELTA_TIME 192 // time after resistor to erogate water in prover
#define VAR_PROGRAMMED_WASH 193 // struct to hold programmed washing info
#define VAR_PROVER_WATER_PULSE_DURATION 194 // programmable prover erogation pulse duration
#define VAR_HOOD_FAN_DURING_COOK 195 // deactivate fan during cooking for "smellless" hood
#define VAR_DUAL_GAS_UNIT 196 // marks oves with dual gas units
#define VAR_CO2_MAX_LOW 197 // Low CO2 limit during fumes test in max combustion
#define VAR_CO2_MAX_HIGH 198 // High CO2 limit during fumes test in max combustion
#define VAR_CO2_MIN_LOW 199 // Low CO2 limit during fumes test in min combustion
#define VAR_CO2_MIN_HIGH 200 // High CO2 limit during fumes test in min combustion
#define VAR_CO_LIMIT 201 // CO limit in fumes test
#define VAR_DRY_TIME_AFTER_PRECOOL 202 // duration of drying procedure after precooling
#define VAR_FIRST_INSTALLATION_SETTING 203 // Start the first installation setup
#define VAR_PREHEAT_WATER_FULL 204 // erogate additional water in preheat
#define VAR_GAS_GROUP 205 // // identifier for gas group
#define VAR_WASH_GROUP 206 // // identifier for wash group
#define VAR_MUST_RUN_FIRST_INSTALLATION 207 // Unox test machine set this parameter to force the first installation
#define VAR_CLOUD_PIN 208 // A pin to transmit to the cloud
#define VAR_LOCK_VIEW 209 // hides view modify button
#define VAR_ERNEST_SPARALESTO 210 // How many seconds to stay in slide view before going back to oncook
#define VAR_LOCK_SCREEN_ON_OPEN_DOOR_TIMER 211 // how many seconds the screen is locked after closing the door
#define VAR_DDC_GOAL 212 // How many hours per day the user wants to use the oven
#define VAR_UNOX_CLOUD_SERVER 213 // Unox Cloud server address
#define VAR_EXPORT_HACCP_TO_USB 214 // Export HACCP data to USB
#define VAR_CO2_MAX_LOW_G20 215 // CO2 max level, low gas G20
#define VAR_CO2_MAX_LOW_G25 216 // CO2 max level, low gas G25
#define VAR_CO2_MAX_LOW_G251 217 // CO2 max level, low gas G25.1
#define VAR_CO2_MAX_LOW_G30 218 // CO2 max level, low gas G30
#define VAR_CO2_MAX_LOW_G31 219 // CO2 max level, low gas G31
#define VAR_CO2_MAX_HIGH_G20 220 // CO2 max level, high gas G20
#define VAR_CO2_MAX_HIGH_G25 221 // CO2 max level, high gas G25
#define VAR_CO2_MAX_HIGH_G251 222 // CO2 max level, high gas G25.1
#define VAR_CO2_MAX_HIGH_G30 223 // CO2 max level, high gas G30
#define VAR_CO2_MAX_HIGH_G31 224 // CO2 max level, high gas G31
#define VAR_CO2_MIN_LOW_G20 225 // CO2 min level, low gas G20
#define VAR_CO2_MIN_LOW_G25 226 // CO2 min level, low gas G25
#define VAR_CO2_MIN_LOW_G251 227 // CO2 min level, low gas G25.1
#define VAR_CO2_MIN_LOW_G30 228 // CO2 min level, low gas G30
#define VAR_CO2_MIN_LOW_G31 229 // CO2 min level, low gas G31
#define VAR_CO2_MIN_HIGH_G20 230 // CO2 min level, high gas G20
#define VAR_CO2_MIN_HIGH_G25 231 // CO2 min level, high gas G25
#define VAR_CO2_MIN_HIGH_G251 232 // CO2 min level, high gas G25.1
#define VAR_CO2_MIN_HIGH_G30 233 // CO2 min level, high gas G30
#define VAR_CO2_MIN_HIGH_G31 234 // CO2 min level, high gas G31
#define VAR_CO_HIGH_G20 235 // CO level, high gas G20
#define VAR_CO_HIGH_G25 236 // CO level, high gas G25
#define VAR_CO_HIGH_G251 237 // CO level, high gas G25.1
#define VAR_CO_HIGH_G30 238 // CO level, high gas G30
#define VAR_CO_HIGH_G31 239 // CO level, high gas G31
#define VAR_SHOW_FIRST_INSTALLATION 240 // Show the first installation last data recorded
#define VAR_STEAM_TUNING 241 // shift the steam erogation row to use, only for shop.pro master
#define VAR_USE_EV 242 // select ev-based or pump-based steam erogation
#define CINNABON_HOME_PAGE_ICONS 243 // How many icons in Cinnabon home page
#define VAR_OVEN_TEMP_CORRECTION 244 // Cinnabon oven temperature correction
#define VAR_PROVER_TEMP_CORRECTION 245 // Cinnabon prover temperature correction
#define VAR_DELTA_TEMP_PREHEATING 246 // Cinnabon delta temperature in preheating
#define VAR_SMOOTH_PREHEATING 247 // smooth preheating
#define VAR_SMART 248 // smart preheating
#define VAR_AC_TUNING 249 // adjusts adaptive.cooking time correction
#define VAR_BUZZER_VOLUME 250 // sets the buzzer sound frequency
#define VAR_AUTOMATIC_DOOR 251 // sets eoc automatic door opening
#define VAR_CINNABON_PACE 252 // // Use Cinnabon domestic or international pace table
#define VAR_RESET_DIRTYNESS 253 // command to reset the oven dirtyness level
#define VAR_MOST_USED_PROGRAMS 254 // it is used to better calculate dirtyness on the basis of the most used cooking programs
#define VAR_AUTOCOOK_FLAVOR 255 // Choose which autocook programs to show
#define VAR_LAST_CLOUD_LOGGED_IN 256 // Last day the oven reached the cloud with a login
#define VAR_UFINE_IS_ACTIVE 257 // UNOX.Finest brita type is active
#define VAR_BPURE_IS_ACTIVE 258 // BAKERY.Pure C50 brita type is active
#define VAR_USE_EXT_BUZZER 259 // use external buzzer for MASTER
#define VAR_ADAPTIVE_CLIMA_DEFAULT 260 // It enables to overwrite adaptive.cooking setting
#define VAR_AUTO_SOFT_DEFAULT 261 // It enables to overwrite auto.soft setting
#define VAR_SMART_PREH_DEFAULT 262 // It enables to overwrite smart.preheating setting
#define VAR_CHAMBER_VOLUME 263 // cooking chamber volume in m3
#define VAR_OPEN_DOOR_POWERON_TIME 264 // resistors poweron time with open door [s]
#define VAR_PRESSURE_STEAM 265 // activates the visibility of the icon to set pressure steam steps
#define VAR_PRESSURE_STEAM_GEN_TIME 266 // pressure.steam phase 1 (steam generation) time
#define VAR_PRESSURE_STEAM_COOK_TIME 267 // pressure.steam phase 2 (cooking) time
#define VAR_PRESSURE_STEAM_COOK_TEMP 268 // pressure.steam phase 2 (cooking) temperature
#define VAR_BLOWER_MAX_SPEED_G10 269 // Max speed for gas blower
#define VAR_BLOWER_START_SPEED_G10 270 // Start speed for gas blower
#define VAR_BLOWER_MIN_SPEED_G10 271 // Min speed for gas blower
#define VAR_BLOWER_PPK_DROP_HIGH 272 // Increased percent of the blower after time at max
#define VAR_BLOWER_MAX_SPEED_G251 273 // Max speed for gas blower
#define VAR_BLOWER_START_SPEED_G251 274 // Start speed for gas blower
#define VAR_BLOWER_MIN_SPEED_G251 275 // Min speed for gas blower
#define VAR_BLOWER_MIN_SPEED_G253 276 // Min speed for gas blower
#define VAR_BLOWER_MAX_SPEED_G253 277 // Max speed for gas blower
#define VAR_BLOWER_START_SPEED_G253 278 // Start speed for gas blower
#define VAR_GAS_POWER 279 // gas power level
#define VAR_CO2_MAX_LOW_G253 280 // CO2 max level, low gas G25.3
#define VAR_CO2_MAX_LOW_G110 281 // CO2 max level, low gas G110
#define VAR_CO2_MAX_HIGH_G253 282 // CO2 max level, high gas G110
#define VAR_CO2_MAX_HIGH_G110 283 // CO2 max level, high gas G110
#define VAR_CO2_MIN_LOW_G253 284 // CO2 min level, low gas G25.3
#define VAR_CO2_MIN_LOW_G110 285 // CO2 min level, low gas G110
#define VAR_CO2_MIN_HIGH_G253 286 // CO2 min level, high gas G25.3
#define VAR_CO2_MIN_HIGH_G110 287 // CO2 min level, high gas G110
#define VAR_CO_HIGH_G253 288 // CO level, high gas G25.3
#define VAR_CO_HIGH_G110 289 // CO level, high gas G110
#define VAR_PRESSURE_STEAM_PREH_HOLD_TIME 290 // pressure.steam preheating hold time [s]
#define VAR_SHOW_SERVICE_CONTACTS 291 // Shows the service contacts
#define VAR_TIMER_GAS_TORCH_WASHING 292 // time to let the gas flow through the barrel to let it wash the torch from combustion products [s]
#define VAR_SAFE_LOCK_PIN 293 // pin that locks the screen after a certain time
#define VAR_SAFE_LOCK_TIMEOUT 294 // timeout to lock the screen
#define VAR_UPDATE_PROVER_BOARD 295 // // Define only
#define VAR_UPDATE_HOOD_BOARD 296 // // define only
#define VAR_PROVER_HUM_OFFSET 297 // prover measured humidity offset
#define VAR_WATER_DRAINAGE 298 // level of prover pump activity
#define VAR_REQUEST_DOOR_SKIP_PRE 299 // when skipping preheat opening the door is requested for it to actually end
#define VAR_PROVER_STEAM_PRODUCTION_TIME 300 // Prover steam production duration [s] after tapping the steam button
#define VAR_MIN_STEAM_TEMP 301 // minimum steam cooking temperature
#define VAR_MAX_STEAM_TEMP 302 // maximum steam cooking temperature
#define VAR_MAX_STEAM_DELTA_TEMP 303 // maximum steam cooking delta temperature allowed
#define VAR_STEAM_POWER_TIME_LIMIT 304 // limit max power time in steam cooking
#define VAR_PRECOOL_SPEED 305 // water flow during precool
#define VAR_BIG_POWER_LEVEL 306 // Identifier for big ovens power control split levels
#define VAR_F_N_REV 307 // Set Phase-Neutral reverse on power board
#define VAR_WASHING_VALVES_TYPE 308 // washing valves type
#define VAR_EG_1_SELF_FLOW 309 // EG1 self-cleaning valve flow for 1- or 2-rotors ovens
#define VAR_EG_2_SELF_FLOW 310 // EG2 self-cleaning valve flow for 1- or 2-rotors ovens
#define VAR_EL_2_SELF_FLOW 311 // EL2 self-cleaning valve flow for 1- or 2-rotors ovens
#define VAR_EG_1_FLOW_3_ROT 312 // EG1 normal valve flow for 3-rotors ovens
#define VAR_EG_2_FLOW_3_ROT 313 // EG2 normal valve flow for 3-rotors ovens
#define VAR_EL_2_FLOW_3_ROT 314 // EL2 normal valve flow for 3-rotors ovens
#define VAR_EG_1_SELF_FLOW_3_ROT 315 // EG1 self-cleaning valve flow for 3-rotors ovens
#define VAR_EG_2_SELF_FLOW_3_ROT 316 // EG2 self-cleaning valve flow for 3-rotors ovens
#define VAR_EL_2_SELF_FLOW_3_ROT 317 // EL2 self-cleaning valve flow for 3-rotors ovens
#define VAR_MPS_RAMP_POWER_LIMITER 318 // percent of limit on erogated power during mild pressure steam ramp (phase one)
#define VAR_EVS_REAL_FLOW 319 // Measured flow for ev1+ev2 valves
#define VAR_DEFAULT_STANDBY_TEMPERATURE 320 // default temperature to use when switching to speed mode
#define VAR_CUSTOM_STANDBY_TEMPERATURE 321 // user customized standby temperature for speed mode
#define VAR_MICROWAVE 322 // enables microwaves usage
#define VAR_AUTOCOOK_FLAVOR_PER_MODEL 323 // Different models of ovens can have different autocook programs
#define VAR_BLOWER_MIN_SPEED_GA1K 324 //
#define VAR_BLOWER_MAX_SPEED_GA1K 325 //
#define VAR_BLOWER_START_SPEED_GA1K 326 //
#define VAR_CO2_MAX_LOW_GA1K 327 //
#define VAR_CO2_MAX_HIGH_GA1K 328 //
#define VAR_CO2_MIN_LOW_GA1K 329 //
#define VAR_CO2_MIN_HIGH_GA1K 330 //
#define VAR_CO_HIGH_GA1K 331 //
#define VAR_TIMER_BTW_CONSECUTIVE_COOKINGS 332 // how many seconds to stay in eoc view after opening and closing the door, before being automatically redirected to the page from where the program itself was started
#define VAR_HEATING_ELEMENTS 333 // define only
#define VAR_ENABLE_HEATING_ELEMENT_1 334 // is resistor 1 enabled
#define VAR_ENABLE_HEATING_ELEMENT_2 335 // is resistor 2 enabled
#define VAR_ENABLE_MAGNETRON_1 336 // is magnetron 1 enabled
#define VAR_ENABLE_MAGNETRON_2 337 // is magnetron 2 enabled
#define VAR_REDIRECTION_AFTER_END_OF_COOK 338 // [s] enables the automatic redirection at end of cook to the page from where the program was started
#define VAR_BLOWER_MIN_SPEED_GA1J 339 // Min blower speed for A13-JP
#define VAR_BLOWER_MAX_SPEED_GA1J 340 // Max blower speed for A13-JP
#define VAR_BLOWER_START_SPEED_GA1J 341 // Start blower speed for A13-JP
#define VAR_CO2_MAX_LOW_GA1J 342 //
#define VAR_CO2_MAX_HIGH_GA1J 343 //
#define VAR_CO2_MIN_LOW_GA1J 344 //
#define VAR_CO2_MIN_HIGH_GA1J 345 //
#define VAR_CO_HIGH_GA1J 346 //
#define VAR_MAG1_POWER 347 // power consumption of MAGNETRON1
#define VAR_MAG2_POWER 348 // power consumption of MAGNETRON2
#define VAR_FAN_ALTERNATION_TIMER 349 // Timer after which fans alternate
#define VAR_FORCE_INTERNAL_WIFI 350 // Force the use of internal WIFI with ESP32 even if a bridge on CAN is connected
#define VAR_DISABLE_INTERNAL_WIFI 351 // WIFI Radio remains OFF
#define VAR_MAG1_USAGE_TIME 352 // usage time of MAGNETRON 1 [h]
#define VAR_MAG2_USAGE_TIME 353 // usage time of MAGNETRON 2 [h]
#define VAR_RESET_MAG1_USAGE_TIME 354 // reset of MAGNETRON 1 usage time
#define VAR_RESET_MAG2_USAGE_TIME 355 // reset of MAGNETRON 2 usage time
#define VAR_HARDWARE_VERSION 356 // hardware version (.0, .1, .2, ...)
#define VAR_SINGLE_PHASE_CURRENT_LIMIT 357 // is single phase current limited
#define VAR_USE_EXT_RELAY 358 // tk food external relay request
#define VAR_PLANNER_MODE 359 // Activate/deactivate planner
#define VAR_SHOW_PLANNER_MODE 360 // Show/hide planner icon
#define VAR_SHOW_CHEFUNOX_AUTOCOOK 361 // used to hide home icons
#define VAR_SHOW_CHEFUNOX_MULTITIME 362 // used to hide home icons
#define VAR_SHOW_RINSE_LIST 363 // used to hide home icons
#define VAR_DRAIN_PUMP 364 // Drain pump connected
#define VAR_SHOW_WASH_H2O 365 // Show/hide RINSE in Rotor.Klean menu
#define VAR_SHOW_WASH_QUICK 366 // Show/hide QUICK in Rotor.Klean menu
#define VAR_SHOW_WASH_SHORT 367 // Show/hide SHORT in Rotor.Klean menu
#define VAR_SHOW_WASH_MEDIUM 368 // Show/hide MEDIUM in Rotor.Klean menu
#define VAR_SHOW_WASH_LONG 369 // Show/hide LONG in Rotor.Klean menu
#define VAR_SHOW_WASH_SOFTENING 370 // Show/hide SOFTENING in Rotor.Klean menu
#define VAR_PERSONAL_PROGRAM_STYLE 371 //
#define VAR_CLEAN_THE_AIR_FILTER_AT_STARTUP 372 // Show the "CLEAN THE AIR FILTER" popup at every startup
#define VAR_WASH_OVEN_AT_STARTUP 373 // Show "HAVE YOU WASHED YOUR OVEN RECENTLY" popup at every startup
#define VAR_IS_UPPER_OVEN 374 // // 1 if this is the upper oven of a UNOX.Casa column, 0 otherwise
#define VAR_EXPECTED_FREQUENCY 375 // Expected network frequency depending on the oven model
#define VAR_EXPECTED_VOLTAGE 376 // Expected nominal supply voltage depending on the oven model
#define VAR_TESTING_MODE 377 // Service testing mode
#define VAR_STANDBY_LED 378 // Led status when oven is in standby
#define VAR_USE_HYBRID_RELAYS 379 // // Hybrid relays connected
#define VAR_SHOW_WASHING 380 // used to hide home icons
#define VAR_FAN_INVERSION_IN_SPEED_MODE 381 // enables fan inversion during SPEED cookings
#define VAR_STANDBY_IN_FAIR_MODE 382 // The panel can go in standby also when the oven is in fair mode
#define VAR_PERSONAL_USER_PIN 383 // personal user pin
#define VAR_RESET_USER_PIN 384 // command to reset the user pin
#define TEST 385 // Testtest
#define VAR_LOCK_WASH_SCHEDULING 386 // Lock scheduled wash editing
#define VAR_DATE_LAST_DDC_RECIPES 387 // Date of last recipes update from DDC (PROGRAMS_TO_OVEN request)
#define VAR_HOME_PAGE_THEME 388 // Selects the home page theme (image, colors, etc.)
#define RITEST 389 // Ritest
#define VAR_SHOW_CLICKSON_WARNING 390 // Show clickson warning
#define VAR_DEFAULT_SPEED_COOKING_MODE 391 // SPEED mode default cooking (MULTI.Speed or single)
#define VAR_SKIP_PREHEAT_IN_SPEED_MODE 392 // Skip preheat in SPEED mode
#define VAR_TIME_FORMAT 393 // Time Format 24-hour or 12-hour
#define VAR_DO_FAN_BREAK_IN 394 // Enable/disable the break-in period for the fans
#define VAR_FAN_ACTIVITY_COUNTER 395 // Counter of fans activity time (in minutes)
#define VAR_BRAND_CUSTOMIZATION 396 // Customization according to brand ( Circle-K, Bloomin, etc. )
#define VAR_N_OF_PZ_IN_MULTISPEED 397 // Number of pieces in MULTI.Speed
#define VAR_UPDATE_CAN_INTERFACE 398 // Update integrated esp
#define VAR_NON_USARE_TEST 399 // Non usare, test di inserimento
#define VAR_MULTITIME_TIMERS 400 // Number of multitime timers that can run simultaneously
#define VAR_DEFAULT_MULTITIME_CLIMA 401 // Clima of the default MULTITIME
#define VAR_DEFAULT_MULTITIME_FAN 402 // Fan of the default MULTITIME
#define VAR_DEFAULT_MULTITIME_TEMP 403 // Temperature of the default MULTITIME
#define VAR_ENABLE_DEFAULT_MULTITIME 404 // Start the default MULTITIME when pressing start from homepage
#define VAR_UPDATE_MAGNETRON_BOARD 405 // Update magnetron board
#define VAR_MAX_SPEED_MODE_TIME 406 // After this many hours in unsupervised SPEED MODE, a SPEED.Pro will automatically switch back to BAKE MODE
#define VAR_UPDATE_MODBUS_TCP_BRIDGE 407 // Update modbus tcp bridge
#define VAR_MODBUS_TCP_BRIDGE_NET_IP 408 // Modbus tcp bridge net ip
#define VAR_MODBUS_TCP_BRIDGE_NET_MASK 409 // Modbus tcp bridge net mask
#define VAR_MODBUS_TCP_BRIDGE_NET_GW 410 // Modbus tcp bridge net gateway
#define VAR_SHOW_BREAKFAST_SET 411 // used to hide home icons
#define VAR_SHOW_LUNCH_SET 412 // used to hide home icons
#define VAR_SHOW_DDC_AT_STARTUP 413 // Show DDC at startup
#define VAR_SECONDS_TO_ADD_MT_RECIPES 414 // How many seconds to stay in mtpick view before show the MT recipes again
#define VAR_SHOW_SENSE_KLEAN 415 // Show/hide sense.klean
#define VAR_CONSIDER_HUM_IN_PROVER_PREH 416 // Prover preheating does not end until setpoint humidity is reached
#define VAR_MT_TEMP_TOL 417 // Multitime temperature set tolerance (tenths of degrees)
#define VAR_MT_FAN_TOL 418 // Multitime fan set tolerance
#define VAR_BUZZER_DOOR 419 // Enable/disable the buzzer when door is open
#define VAR_END_OF_PREH_BUZZER 420 // Second of buzzer ring at end of preheating
#define VAR_INVERSION_ENABLED 421 // Enable/disable fan inversion
#define VAR_BYPASS_VALVE_FAT_GATHERING 422 // Bypass the valve check during smart drain
#define VAR_SMART_ENERGY 423 // Enable/disbale SMART.Energy
#define VAR_SMART_ENERGY_MT_TIMER 424 // Time [s] before SMART.Energy activation for MT programs when no timer running
#define VAR_SMART_ENERGY_TSET_PERC 425 // SMART.Energy Savings Temperature, based on percentage of the T_set
#define VAR_SMART_ENERGY_STOP_TIMER 426 // Time [min] until program forced stop with SMART.Energy active at savings Temp >= 80%T_set
#define VAR_FAN_ENERGY_STAR_TIMER 427 // Time [min] after which fan limitation is activated for Energy Star
#define VAR_LIST_START 428 // Used to directly start the program (also MT and MEP) from list click
#define VAR_SHOW_MY_PROG_MENU 429 // Used to personalize icons in the menu
#define VAR_SHOW_MY_MINDMAPS_MENU 430 // Used to personalize options in the oven menu
#define VAR_SHOW_MY_MMT_MENU 431 // Used to personalize options in the oven menu
#define VAR_SHOW_MY_MULTITIME_MENU 432 // Used to personalize options in the oven menu
#define VAR_SHOW_NEW_MULTITIME_MENU 433 // Used to personalize options in the oven menu
#define VAR_SHOW_MY_MMEP_MENU 434 // Used to personalize options in the oven menu
#define VAR_SHOW_MY_MEP_MENU 435 // Used to personalize options in the oven menu
#define VAR_SHOW_NEW_MEP_MENU 436 // Used to personalize options in the oven menu
#define VAR_BACK_TO_SPEED_AFTER_STANDBY 437 // Ask to switch to SPEED mode after waking up from standby
#define VAR_SAFETY_CARTER 438 // The oven has carter with small grid
#define VAR_COOLING_MODE 439 // Activate/deactivate cooling
#define VAR_UPURE_C1100_IS_ACTIVE 440 // UNOX.Pure C1100 brita type is active
#define VAR_LIMIT_AF39_TEMP 441 // Temperature threshold for AF39 activation
#define VAR_LOCK_NETWORK_MENU 442 // Lock the network menu using the personal user pin
#define VAR_DEBUG_MODE 443 // Enable/Disable Debug mode
#define VAR_MOST_USED_OVEN 444 // Which oven of the column is most used. 0 (upper), 1 (lower)
#define VAR_HOOD_DOUBLE_RESISTOR_KIT_INSTALLED 445 // Is the hood "double resistor kit" installed?
#define VAR_ENHANCED_FUMES_CONDENSATION_TEMPERATURE 446 // Hood fumes condensation is enhanced beyond this temperature
#define VAR_SLIDER_CLIMA_ML 447 // Enable/Disable slider clima in water quantity [ml] for SET cookings (LIDL)
#define VAR_PROVER_WATER_SUPPLY 448 // Prover water supply (network/tank/..?)
#define VAR_UPDATE_INVERTER_BOARD 449 // Update inverter board
#define VAR_AC_FOR_MULTISPEED_INTENSITY 450 // Adjust ADAPTIVE.Cooking intensity for MULTI.SPEED
#define VAR_REFRESH_DDC_USAGE 451 // Recalculate ddc consumptions
#define VAR_SHOW_SPEED_TEMP_1 452 // Show/hide standby temperature 1 (150 °C)
#define VAR_SHOW_SPEED_TEMP_2 453 // Show/hide standby temperature 2 (180 °C)
#define VAR_SHOW_SPEED_TEMP_3 454 // Show/hide standby temperature 3 (220°C)
#define VAR_SHOW_SPEED_TEMP_4 455 // Show/hide standby temperature 4 (260 °C)
#define VAR_SHOW_SPEED_TEMP_CUSTOM 456 // Show/hide custom standby temperature
#define VAR_CEIL_TEMP_THRESHOLD_WARNING 457 // Temperature threshold for "ceil temp too high" warning WF73 activation ( replace VAR_LIMIT_AF39_TEMP - see #11290 )
#define VAR_CEIL_TEMP_THRESHOLD_W_BIG 458 // [for BIG] Temperature threshold for "ceil temp too high" warning WF75 activation (#11620)
#define VAR_SHOW_FAVORITES 459 // used to hide home icons
#define VAR_AC_MS_INTENSITY_2_PCS 460 // ADAPTIVE.Cooking for MULTISPEED tuning - 2 pieces
#define VAR_AC_MS_INTENSITY_3_PCS 461 // ADAPTIVE.Cooking for MULTISPEED tuning - 3 pieces
#define VAR_AC_MS_INTENSITY_4_PCS 462 // ADAPTIVE.Cooking for MULTISPEED tuning - 4 pieces